Utax P-C4580DN - No Staple Error (Setting When the Staples Run Out); Stapling Limit (Setting When the Number of Sheets Exceeds the Stapling Limit)

Operation Panel
6-68
1 In the Error Handling menu, press  or  to select Finishing
Error.
2 Press [OK]. The Finishing Error screen appears.
3 Press  or  to select the setting for handling finishing error.
4 Press [OK]. The handling of finishing error is set and the Error
Handling menu screen reappears.
No Staple Error (Setting when the staples run out)
This setting can be specified when an optional document finisher is installed.
Select the setting when the staples run out and the Add staples. message is displayed during stapling.
1 In the Error Handling menu, press  or  to select No Staple
Error.
2 Press [OK]. The No Staple Error screen appears.
3 Press  or  to select the setting for handling no staple error.
4 Press [OK]. The handling of no staple error is set and the Error
Handling menu screen reappears.
Stapling Limit (Setting when the number of sheets exceeds the stapling limit)
Select the setting when the number of printed sheets exceeds the number of sheets that can be stapled.
Finishing Error: a b
********************-
2 Display Error
1 *Ignore
Display
Error
• A message is displayed and printing stops. Printing
automatically resumes when staples are added.
Ignore • A message is displayed, however, printing continues
without stapling.
No Staple Error: a b
********************-
2 Display Error
1 *Ignore
Display
Error
• A message is displayed and printing stops.
Ignore • A message is not displayed and printing continues without
stapling.