7-13
Maintenance
Emptying the Punch Waste Box (Option)
If a message is displayed on the machine operation panel indicating that the waste punch box is full, be sure to empty the
scraps in the punch waste box.
Leave the main power switch on the machine switched ON ( | ) while performing this procedure.
1,000-sheet Finisher (Option)
1 Open the front cover.
2 Grasp the punch waste box handle and remove the box from the
Document Finisher.
3 Dispose of the hole punch scraps appropriately.
4 Re-install the punch waste box. Align it with the guides in the
Document Finisher.
5 Close the front cover.
Note The staple cartridge can only be removed when it
contains no more staples.
To Next Page
Loading...
Need help?
General
