Operation Panel
6-78
5 Press or to select the Login Password entry field.
6 Press [OK]. The Login Password entry screen is displayed.
7 Enter the Login Password with the numeric keys then press [OK].
The login screen reappears.
8 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Manual Staple menu screen
appears.
Off/On
Select whether or not to set the setting for Manual Staple.
1 In the Manual Staple menu, press or to select Off/On.
2 Press [OK]. The Off/On screen appears.
3 Press or to select whether Manual Staple setting is enabled.
4 Press [OK]. The Manual Staple setting is set and the Manual
Staple menu reappears.
Note The initial setting for the administrator's Login
Password is "Admin".
For details on entering characters, refer to Character Entry
Method on page A-6.
To Next Page
Loading...
Need help?
General
