Operation Panel
6-92
I/F Block Set. (External interface block setting)
You can use this to lock and thereby protect the interface.
The options available in I/F Block Set. are as follows:
• USB Host (USB Port setting)...6-92
• USB Device (USB interface setting)...6-92
• Option I/F (Network interface card (NIC) setting)...6-93
• USB Storage (USB memory setting)...6-93
1 In the Security menu, press or to select I/F Block Set..
2 Press [OK]. The I/F Block Set. menu screen appears.
USB Host (USB Port setting)
This locks and protects the USB Port (USB Host). The default setting is Unblock.
1 In the I/F Block Set. menu, press or to select USB Host.
2 Press [OK]. The USB Host screen appears.
3 Press or to select whether a USB host is used.
4 Press [OK]. The USB Host setting is set and the I/F Block Set. menu
reappears.
USB Device (USB interface setting)
This locks and protects the USB interface. The default setting is Unblock.
1 In the I/F Block Set. menu, press or to select USB Device.
2 Press [OK]. The USB Device screen appears.
3 Press or to select whether a USB device is used.
4 Press [OK]. The USB Device setting is set and the I/F Block Set.
menu reappears.
To Next Page
Loading...
