Utax P-C4580DN - Page 220

Operation Panel
6-96
Initialization (Initialize on HDD)
Overwrite all the data stored in the HDD when disposing of the printer.
1 In the HDD Initializ. menu, press  or  to select
Initialization.
2 Press [OK]. A confirmation message is displayed.
3 Press [Yes] ([Left Select]). Initialization starts.
If you do not wish to initialize, press [No] ([Right Select]). The HDD
Initializ. menu reappears.
4 When the initialization is finished Completed. is displayed. Press
[OK] ([Right Select]) and turn the power switch off.
IMPORTANT If you accidentally turn the power switch off during initialization, the HDD might possibly crash or
initialization might fail.
System Initialization
will start.
Are you sure?
[ Yes ] [ No ]
Completed.
Turn the main power
switch off.