Utax P-C4580DN - Page 225

6-101
Operation Panel
Server Type (Server type selection)
• Select the type of server for the authentication server.
1 In the Netwk Auth. Set menu, press  or  to select Server
Type.
2 Press [OK]. The Server Type. Set screen appears.
The available server types are as follows:
NTLM
Kerberos
Ext.
3 Press  or  to select the desired server type.
4 Press [OK]. The server type is set and the Netwk Auth. Set menu
reappears.
Host Name (Entering of Host Name)
Enter the Host Name for the authentication server.
1 In the Netwk Auth. Set menu, press  or  to select Host Name.
2 Press [OK]. The Host Name screen appears.
3 Enter the Host Name using the numeric keys.
4 Press [OK]. Register the Host Name and the Netwk Auth. Set
menu reappears.
Port (Port number setting)
Set the Port number for the authentication server.
1 In the Netwk Auth. Set menu, press  or  to select Port.
2 Press [OK]. The Port screen appears.
3 Enter the Port number with the numeric keys.
4 Press [OK]. Register the Port number and the Netwk Auth. Set
menu reappears.
Server Type: a b
1 NTLM
********************-
3 Ext.
2 *Kerberos
Note Up to 64 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-6.
Host Name: a b
*
ABC
[ Text ]
Note This setting is only displayed when Ext. has been set as the Server Type (Server type selection) on page 6-
101.
Note If the Port is registered as a blank field, the default Port
number will be enabled.
Port: a b
/******************-
[ Login ]
9093 S