Remote Booster Power Supply Technical Reference Manual i
Content
Important information iii
Limitation of liability iii
Remote Booster Power Supply FCC compliance iv
Introduction 1
Models covered 1
Compatibility 1
Installation procedure checklist 2
Getting started 3
Description 3
Component descriptions 4
Specifications 5
LED indicators 6
Installing the enclosure 7
Installing option modules in the enclosure 8
Installing the circuit board in the enclosure 10
Setting the jumpers 12
NAC Class A or Class B (JP1 and JP2) 12
Ground fault enable (JP3) 12
Battery charging (JP4) 13
UL 864 programming requirements 14
Setting the DIP switches 15
Sense 1 and 2 operation (SW1-1 to 3) 15
Synchronization control (SW1-4) 16
NAC circuit operation (SW1-5 to 8 and SW2-1 to 4) 17
Genesis mode for continuous NACs (SW2-5) 19
AC power loss reporting (SW2-6) 19
Auxiliary control during AC power loss (SW2-7) 19
Class A or B NAC configuration (SW2-8) 20
To Next Page
Loading...
Need help?
General
