Need help?Do you have a question about the UTC Fire and Security Edwards BPS10A/230 and is the answer not in the manual?
General| Input Voltage | 230 VAC |
|---|---|
| Output Current | 10 A |
| Battery Charging Current | 1.5 A |
| Operating Temperature | 0°C to 49 °C |
| Compliance | UL, ULC |
Explains how BPS troubles are indicated and reported via LEDs and relays.
Configures NAC wiring for Class A or Class B.
Enables or disables ground fault detection for NAC/AUX circuits.
Controls battery charging based on battery size.
Defines operating modes based on Sense 1 and 2 inputs.
Configures NAC operation modes (Sense Follow, Continuous, Temporal, Auxiliary).
Configures NAC Class A or B operation.
Steps to calculate maximum NAC cable length using the equation method.
To Next Page
