To Next Page
H
Hannah JimenezAug 5, 2025
Why won't my Utilitech 0955585 Water Pump motor run?
- TTara PowersAug 5, 2025
The motor may not be running due to several reasons: 1. The disconnect switch might be off. Ensure the switch is turned on. 2. A fuse or circuit breaker could be blown. Replace the fuse or reset the circuit breaker. 3. The starting switch may be defective, requiring replacement. 4. Wires at the motor might be loose, disconnected, or incorrectly wired. Refer to the wiring instructions and check or tighten all wiring.
General
