utmark X500 - Starting, Pausing, and Sleeping; Scheduling Cleaning

Product Operating
2. Starting up/Pause/Sleeping
1>. Starting up
A. Make sure the power switch is on;
B. Press CLEAN button on main body or on remote control to start cleaning.
Note: If robot is in sleeping mode, press CLEAN button to wake the robot up from sleeping mode.
Then press CLEAN for a second time, the robot starts cleaning automatically.
2>. Pause
To exchange robot from cleaning mode to selected mode:
A. Press either button among PLAN, SPOT, CLEAN and HOME
buttons on main body;
B. Press CLEAN button on remote control.
Note: When robot is paused, press CLEAN to make robot to re-start cleaning.
3>. Sleeping
To turn robot into sleeping mode from selected mode:
A. Keep pressing CLEAN on main body for 3 seconds.
B. Robot will automatically enter sleeping mode if no command received after 20 seconds.
3. Scheduling
You can schedule to let the robot start cleaning from a certain time. (Time delay up to 23 hours.)
For example, it’s 9:00AM now, you set 6:30 on the robot, the robot will start cleaning after 6 hours
and 30 minutes, that is 15:30 PM. And then the robot will start cleaning at 15:30PM everyday.
Note: The robot will always work at the scheduled time unless power switch on bottom side of
the robot is turned off.
How to schedule the robot?
(1). On main body
A. First press CLEAN to wake the robot up, then press PLAN to enter scheduling mode.
B. Press SPOT and HOME to set time and press PLAN to switch between hour and minute.
C. Press CLEAN to save the setting.
To cancel, keep pressing PLAN for 5 seconds in scheduling mode.
(2). On remote control
A. First press CLEAN to wake the robot up, then press SCHEDULE to enter scheduling mode.
B. Press directional buttons to set the schedule. Press “ ” to set the numbers.
Both SCHEDULE and “ ” could switch between hour and minute.
C. Press CLEAN to save the setting.
To cancel, make the number to “00:00” or keep pressing PLAN on main body for 5 seconds in
scheduling mode.
9
Note: In scheduling mode, each operation you take will be double confirmed by tone.