- For connecting to UTP printer, press TARE when
display shows utP (When choosing utP, the setting
of F7 will change to OFF)
f. After printout format is selected, will enter
sub-menu for auto-printing or not.
Press MODE to shift between Auto or Nauto(non-auto)
- For auto printout when weight is stabilized , press
TARE when display shows Auto
- For manual printout when pressing M+ , press TARE
when display shows Nauto
- When choosing utP, form number from 0 to 9, Prnt.1
or Prnt.2 can be selected according to end user
preference prior to auto printout setting.
g. After TARE is pressed, scale display F9
h. Press MODE to enter next set up or ON/ZERO to restart
the scale
4.2.7 Select Auto Tare Function
This scale is equipped with auto tare function which
tares off the initial weight automatically when this
function is engaged. The tare weight is automatically
cleared when everything is removed from platter.
a. Scale is off
b. Press and hold TARE, then press ON/ZERO
To Next Page
Loading...
