UWE APS - Page 17

TARE when AC_on appears
-To disable Original Calibrated Zero Function,
press TARE when AC_oF appears
g. After TARE is pressed, scale display F11
h. Press MODE to enter next set up or ON/ZERO to restart
the scale
NOTE:
1. For OIML approval, this function would be prohibited.
2. Scale will perform Initial Zero Range setting after
turn-on when choosing AC_oF.
4.2.9 Select Accumulation Function when Pressing M+
This scale is equipped with accumulation function
enabled/disabled when pressing M+. When accumulation
function is engaged, press M+ will simultaneously print
out RS-232/printer data and perform accumulation
function.
a. Scale is off
b. Press and hold TARE, then press ON/ZERO
c. Scale displays F1
d. Press TARE ten times
e. Scale displays F11
f. Press MODE to select between Ad._on or Ad._oF