Vacon CX - Page 13

Vacon Plc Phone: +358-(0)201 2121 Fax: +358-(0)201 212 205
Service: +358-40-8371 150 E-mail: vacon@vacon.com
Page 12
VV
VV
V
aconacon
aconacon
acon
Multi-purpose Control Application IIMulti-purpose Control Application II
Multi-purpose Control Application IIMulti-purpose Control Application II
Multi-purpose Control Application II
Code Parameter Range Step Default Custom Description Page
2.28 Adjust Input 0 - 5 1 0 0 = Not used
1 = Voltage input
2 = Current input
3 = AIN1 I/O-expand
4 = AIN2 I/O-expand
5 = FB signal
2.29 Adjust Percentage 0.0% - 200.0% 0.1% 0.0%
2.30 Adjust Offset 0.0% - 100.0% 0.1% 0.0%
Note!Note!
Note!Note!
Note!
STOP
STOPSTOP
STOP
= Parameter value can be changed only when the frequency converter is stopped.