Vacon NXI - System Menu (M6)

78 • vacon control keypad
Tel: +358-201-2121 • Fax: +358-201-212 205
7
7.3.6 System menu (M6)
You can enter the System menu from the Main menu by pressing Menu button right when the
location indication
M6 is visible on the first line of the keypad display .
The controls associated with the general use of the inverter, such as application selection,
customised parameter sets or information about the hardware and software are located under the
System menu.
The number of submenus and subpages is shown with the symbol S (or P) on the
value line.
Page 79 has a table of the functions available in the System menu.