Vacon NXI - Page 93

control keypad vacon • 93
24-hour support: +358-(0)40-8371 150 • Email: vacon@vacon.com
7
In the Applications information page, press Menu button right to enter the Application pages of
which there are as many as there are applications loaded into the inverter. Locate the desired
application with the
Browser buttons and then enter the Information pages with Menu button right .
Use the
Browser buttons to see the different pages.
Figure 7-21. Applications info submenu
Hardware (S6.8.5)
The Hardware information page provides information on the following hardware-related topics:
Page
Content
6.8.5.1 Nominal power of the unit
6.8.5.2 Nominal voltage of the unit
6.8.5.3 Brake chopper
6.8.5.4 Brake resistor
Table 7-9. Hardware information pages
Expander boards (S6.8.6)
The Expander boards submenu contains information about the basic and option boards . (See
Chapter 6.2)
You can check the status of each board slot by entering the Expander boards page with
Menu button
right.
Use the Browser buttons to view the status of each board slot. The description line of the
keypad will display the type of the expansion board and the text
'Run' is shown below it. If no board is
connected to the slot the text
'no board' will be shown. If a board is connected to a slot but the
connection is lost for some reason, the text
'no conn.' is displayed. For more information, see
Chapter 6.2, Figure 6-13.
For more information on expander board related parameters, see Chapter 7.3.7.
A1
 A7
I/Oterm
I/Oterm
D1
D3
I/Oterm
READY
READY
D1  D3
I/Oterm
READY
NXFIFF01
2.01
I/Oterm
Applications Basic
Standard
Application id
Version