vacuubrand BVC basic - Page 23

page 23 of 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
➨ Screw in hose nozzle or hose nozzle with coupling using
an open-ended wrench.
➨ Screw on cover, paying attention to washers.
 Maximumtorque:2.2ft
.
lb
f
(3Nm).
➨ Only BVC professional / G: In case the cover plate is shift-OnlyBVCprofessional/G:Incasethecoverplateisshift-
ed,ensurethat the ribbon cable isnotsqueezedduring
reassembly.
➨ Position bottle in the support.
➨ Positiontubingtopumpinletandlter.
➨ Screwelbowttingwithsilencertotheoutletofthepump
(max.5turns).
➨ Screwelbowttingwithsilencertotheoutletofthepump
(max.5turns).