Vaillant multiMATIC VRC 700f/4 User Manual

5 Operating and display functions
10 Operating instructions multiMATIC 0020237615_01
4.3.2 Example, changing the display contrast
Auto
5.0 °C
°C
19.5
15:34
Desired heating temp. 20.0 °C
Menu
Op. mode
1. If the display does not show the basic display, press the
left-hand selection button Back until the basic display
appears on the display.
2. Press the left-hand selection button Menu.
◁ The controller switches to selection level 1.
Menu
Information
Desired temperatures
Timer programmes
Back
Select
3. Turn the rotary knob until the list entry Basic settings
is highlighted.
Menu
Planning days away from homePlanning days away from home
Days at home scheduling
Basic settingsBasic settings
Back
Select
4. Press the right-hand selection button Select.
◁ The controller switches to selection level 2.
Basic settings
Language
Date/time
Display
Back
Select
5. Turn the rotary knob until the list entry Display is high-
lighted.
Basic settings
LanguageLanguage
Date/timeDate/time
Display
Back
Select
6. Press the right-hand selection button Select.
◁ The controller will switch to setting level Display.
The adjustable value for the Display contrast will
be highlighted.
Display
Display contrast
Button lock
9
Back Change
7. Press the right-hand selection button Change.
◁ The highlighted value flashes.
Display
Display contrast
Button lock
9
Cancel
OK
8. Turn the rotary knob to change the value.
Display
Display contrast
Button lock
12
Cancel
OK
9. Press the right-hand selection button OK to confirm the
change.
◁ The controller has saved the changed value.
10. Press the left-hand selection button Back repeatedly to
go back to the basic display.
5 Operating and display functions
Note
The functions described in this section are not
available for all system configurations.

Vaillant multiMATIC VRC 700f/4 Specifications

General

Brand	Vaillant
Model	multiMATIC VRC 700f/4
Category	Thermostat
Language	English