Operating instructions for electric domestic hot water cylinders VEN 5/6 U and O (plus) 0020129648_02 9
1
2
3
INTEN, FR, BEFR, BENL, HR
VEN 5/6 plus
Fig.4.1 Scope of delivery for VEN 5/6 O overcounter unit
Item Quantity Name
1 1 Unit
2 1 Wall bracket
3 1 Operating and installation instructions
Tab.4.1 Scope of delivery
i
The wall bracket is located on the back of the
unit.
4.2 Installation site
b
Caution:
Risk of material damage caused by aggres-
sive vapours or dust.
Aggressive vapours and dust in the installa-
tion room can cause corrosion damage to the
electric domestic hot water cylinder.
> Make sure that the installation room is free
of aggressive vapours and dust.
b
Caution:
Risk of frost damage to the unit.
If an electric domestic hot water cylinder is
placed out of operation for a relatively long
period of time in an unheated room in cold
weather, the water in the unit and pipes may
freeze. This would result in damage to the
unit.
> Install the unit in a permanently frost-free
room.
i
In rooms with a bath or shower, the electric
domestic hot water cylinder must be installed
in accordance with all relevant legal require-
ments, e.g. VDE 0100, Part 701 (UK equivalent
= BS 7671 Section 601.
4.3 Unit and connection dimensions
Undercounter unit
250
140
350
Fig.4.2 Installation example: undercounter unit
Installation 4
INTEN
To Next Page
Loading...
