1.5 Indigo Transmitter Base
1 2 4
5
6
3
INDIGO 201 ANALOG
OUTPUT TRANSMITTER
Serial No. SX12345678
Figure 3 Indigo 201 Transmitter Base Main Parts and Screw Positions
1 Probe and probe cable connector inside the locking wheel
2 Wireless (WLAN) configuration interface activation button
3 Wiring from the back: cut open the seal
4 Rubber cable lead-through with strain relief
5 Screw terminals for analog outputs 1-3 and relays A and B
6 Screw terminals for 24 V power supply input
Do not energize the power supply before the wiring has been connected.CAUTION!
Chapter – Indigo 201 Quick Guide
9
ENGLISH
To Next Page
Loading...
