Configuring button tones and backlight
To turn on or off the backlight or the sound effects for the buttons:
1. Open the menu by pressing Open.
2. Select Settings and press .
3. Select User interface and press .
4. To turn the sound effect on or off, select Key Click and press On/Off.
5. To turn the backlight on or off, select Backlight on key press and press On/Off.
6. To return to the basic display, press Exit.
Date and time
As a default, the time format is based on the 24-hour clock. Also a 12-hour clock can be used.
The default date format is day.month.year, for example, 25.4.2020. The date format can be changed to month.day.year.
or year.month.day.
1. Open the menu by pressing Open.
2. Select Settings and press .
3. Select Date and time and press .
4. For the desired date, select Date and then press Set. Use the arrow buttons to change the date. Confirm the
selection by pressing Select. To change the date format, select an option and press Select.
5. For the desired time, select Time and press Set. Use the arrow buttons to change the time. To confirm the
selection, press OK. To change the time format, select 12-hour clock and press On/Off.
6. To return to the basic display, press Exit.
Setting calibration reminder
You can set a calibration reminder to notify when calibration is due. Choose an interval of 3, 6, 12, or 24 months. By
default, the reminder is off.
Figure 1. Calibration reminder menu
Make sure the MI70 date and time settings are correct when using the calibration reminder.
1. Open the menu by pressing Open.
2. Select Settings and press .
3. Select Calibr. reminder and press Set.
4. Choose a reminder interval option and press Select.
5. To return to the basic display, press Exit.
Device information
Figure 1. Device information menu
To Next Page
Loading...
