Vaisala PTB220 Series - Page 27

CHAPTER 4_____________________________________________________________ COMMISSIONING
VAISALA _________________________________________________________________________ 21
>form <cr>
4.2P""UUUU #r #n
?4.2P1""P2""P3""P""UUU""ERR#r#n<cr>
>send <cr>
1020.30 1020.31 1020.32 1020.31 hPa 000
>send <cr>
1020.30 1022.31 1020.32 1020.31 hPa 010 (Pd max error)
>
>form <cr>
4.2P""UUUU #r #n
?4.2P1""P2""P3""P""UUU""ERR#r#n<cr>
>send <cr>
1020.30 1020.31 1020.32 1020.31 hPa 000
>send <cr>
1020.30 1022.31 1024.32 1022.31 hPa 111 (Pd max error)
>
10. To output the pressure reading and the stability state.
>form <cr>
4.2P""UUUU #r #n
?4.2P""UUUOK#r#n<cr>
>send <cr>
1020.30 hPa OK (good stability)
>send <cr>
1020.30 hPa (poor stability)
>
11. To output the pressure reading and the checksums.
>form <cr>
4.2P""UUUU #r #n
?4.2P""UUU""CS2#r#n<cr>
>send <cr>
1020.30 hPa BB
>
12. To output the pressure reading and the height corrected
pressure reading.
>form
4.2 P HCP #r #n
?4.2P""hcp#r#n
>send
1011.12 1012.30
>