Valcom V-D11025B User Manual

7 8A
8B
8
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Wall Mount Installation
7) Detach the filter from the clock display board by
pressing inward on the red tabs.
8B) If you are installing a digital clock that uses sync-wire correction, attach the wires to the appropriate
sync-wire ports. Refer to the section, “Inputs - Clock Side - Sync Wire” for instructions regarding each
system.
8A) If you are installing a digital clock that uses a
2-wire digital sync system, attach the wires to the
port as shown below.
1
2
3
4
5
24VDC (Orange)
24VDC (Yellow)
110VAC (Black)
110VAC (White)
Sync-Wire Ports
1
2
3
4
5
Ground (Green)

Valcom V-D11025B Specifications

General

Brand	Valcom
Model	V-D11025B
Category	Clock
Language	English