Need help?Do you have a question about the Valcom V-D11025B and is the answer not in the manual?
Crucial advice on understanding communication protocols to prevent clock damage.
Steps for installing the gang box and running/checking power and communication wiring.
Steps 7-8B: Detaching filter and connecting 2-wire digital or sync-wire systems.
Steps 13-14: Attaching the housing frame and powering the clock for initial operation.
Steps 1-4: Installing the gang box and attaching the mounting plate to it.
Steps 14A, 14C: Connecting 2-wire digital sync or sync-wire correction systems.
Steps 20-21: Hanging the pole base, connecting wires, and powering up the clock.
Manually setting year, month, day, and 12/24 hour format using front buttons.
Configuration options for programmable relay outputs, including various correction protocols.
Configuring one-day pulse outputs and selecting sync wire input protocols.
Steps to diagnose and resolve issues when the clock is not running.
Steps to diagnose and resolve issues when the clock is not receiving an input signal.
To Next Page
General
