Valeo SC400 - Additional Component Operation

BUS BODY ELECTRONICS
12
2.7 Switch air-conditioning/recirculating air
Press button in order to switch between air-condition-
ing and recirculating air.
➔ If the status light above the air-conditioning/recirculating
air button lights up, the air-conditioning/recirculating air
function is active and the fresh air supply is deactivated
(Figure 13). The fresh air/recirculating air valves are
closed.
➔ If the status light above the fresh air/recirculating air but-
tons does not light up, the fresh air/recirculating air func-
tion is not active. The fresh air valves are open (Figure 14).
Note
If the air-conditioning compressor is active, the fresh
air/recirculating air valves are closed
, as standard. If the
heating function is active, the fresh air/recirculating air
valves are open.
These defaults can be overwritten for 10 minutes by
pressing the fresh air/recirculating air button. Thereafter,
the system returns to the standard configuration.
Note
Close the fresh air/recirculating air valves to heat up
quickly.
Figure 13 - SC410 recirculating air
function active
Figure 14 - SC410 fresh air valves open