Appendix 3 Operation with DataLog x2
Appendix 3 Operation with DataLog x2
The 106 is supplied with DataLog x2 software for setup and data offload and display with a number of
alphanumeric and graphical options.
Please see separate manual – 04008373a – DataLog x2 and Terminal x2 Operating Manual
Problems have arisen when the setup wizard is used and no changes are made, the ‘Finish’ key is not
available – see below for a solution to this problem.
The final screen will show a summary of the
commands that will be sent to the instrument.
If settings have not been changed, then no
commands will be shown and the finish button is
greyed out.
Simply type a # into the command window and
the Finish button will be available.
To Next Page
Loading...
