GLOBAL
12
Calibrate
Then, press the pedal toe down strongly and press the PARA
button to select Next.
If the pedal is successfully calibrated, the following prompt
will be displayed. Press the PARA button to confirm the
calibration and return to the previous menu.
If pedal calibration fails, press the the PARA button to re-
calibrate.
Use this menu to set up USB audio settings when using GP-
100 as a USB audio interface. The Rec Mode options allow you
to select USB recording input sources on left (L) and right (R)
input channels. The selections for these are the same: dry
signal (Dry) and wet signal (Eect). When recording, adjust
the optimal Rec Level according to the instrument or other
devices you're using.
Rec Level: range: -20dB to +20dB, default: 0dB
USB Audio
To Next Page
Loading...
