Valeton GP-100 - Global Settings: Footswitch and Language; Footswitch Mode Selection; System Language Configuration

GLOBAL
13
This menu is used to set the GP-100 FOOTSWITCH mode.
Turn Quick adjust knob 2 to select the footswitch mode. You
can select footswitch mode as PATCH mode or STOMP mode.
Footswitch Mode
Language
This menu is used to set the GP-100 language.
Press the PARA button to enter the language settings menu.
Turn the PARA knob button to select the system languag and
press the PARA button to confirm the selection.
Press the PARA button again or press the EXIT button to
return to the previous menu.
NOTE
In both footswitch modes, press and hold footswitch [-] to turn
on/o Tap Tempo function, press and hold footswitch [+] to
switch footswitch mode.