Valeton GP-100 - Suggested Setups: Computer and Aux Input; Using GP-100 as Audio Interface; Using the AUX IN Line

Suggested Setups
Using the AUX IN line
Connect a male-to-male 1/8” stereo cable from your audio source (phone or MP3 player) to GP-100’s AUX IN
jack. This line will be unaected by GP-100’s internal eects. Note: if you are running a mono line out, you will
only hear a mono version of your AUX source.
Connecting to your computer as an audio interface
Connect a USB cable (not included) from GP-100 to your computer. For PC systems, you’ll need to set up the
driver. GP-100 is plug and play for macOS. Run line out cables to your monitors, or use headphones.
17