SOFTWARE
Connect GP-100 to your computer and access the free software to manage your GP-100 device, adjust tonal
settings, transfer files, update firmware, restore settings, and upload third party IR files. GP-100 software is
compatible with Windows and macOS platforms. Log on to www.valeton.net/support to download the free
software.
15
Suggested Setups
Using with your instrument and amp
Here are some common setups to get the most out of GP-100.
Plug your instrument into the GP-100 instrument INPUT jack, and run a cable (or two) from the OUTPUT(s) to
your amplifier(s). If you have one amp, run the cable from the left output.
For best results, turn o the AMP and CAB modules on GP-100.
To Next Page
Loading...
