Valeton GP-100 User Manual

11. INPUT Jack
1/4” mono audio jack, for connecting guitar.
12. OUTPUT L/OUTPUT R Jack
1/4” TRS output interfaces can be configured
for mono or stereo operation. Use them to
connect to a single guitar speaker, a pair of
stereo guitar speakers, or directly to the input
of a PA or recording device.
13. AUX IN
1/8” TRS input for connecting external devices
(phone, MP3 player) for practice and
jamming.
14. PHONES
1/8” TRS output for connecting headphones.
15. USB
USB 2.0 Type-B connects to your computer
for use with GP-100 software, or as a USB
audio interface.
16. Power Supply Connection
Power supply input (9V DC center negative) .
11
12
13
14
15 16
12
GETTING STARTED
The GP-100 has two operation modes: Play Mode and Edit Mode.
GP-100 will be in play mode when first powered on. The LED screen shows the patch number (from
P01 to F99), master volume, patch volume, BPM, patch name and more. Play Mode allows you to
navigate presets using the PARA knob or footswitches.
A
B
C
D E
F
G
I
H
Play Mode
A. Patch No.
B. Patch name
C. Foot switch mode
D. Master volume
E. Patch BPM
F. Patch volume
G. EXP pedal state
H. Patch state
I. DRUM state
4
Rear View
PANEL INTRODUCTION

Valeton GP-100 Specifications

Audio Specifications

A/D/A Converter	24-bit
Sampling Frequency	44.1 kHz
SNR	110dB

Analog Input Connections

Guitar Input	1/4” Unbalanced (TS)
Input Impedance	1M Ohm
Aux Input	1/8” Stereo (TRS)

Analog Output Connections

Left/Right Outputs	1/4” Impedance Unbalanced
Left/Right Output Impedance	1k Ohms
Headphone Output	1/8” Stereo (TRS)

USB Recording Specification

Sample Rate	44.1 kHz
Bit Depth	16-bit or 24-bit
USB Port	USB 2.0 Type-B port

Size and Weight

Dimensions	198 mm(W) x 134 mm(D) x 28 mm(H)
Unit Weight	800g
Power Requirements	DC 9V, 500mA