WELCOME
Thank you for purchasing a VALETON product.
Please read this manual carefully to get the most out of your GP-100.
Please keep this manual for future reference.
Handling
Connecting the power and input/output jacks
·Do not get the unit wet. If liquid is spilled on the unit, shut it o immediately.
·Do not block any of the ventilation openings.
Keep away from heat sources.
·Disconnect the unit during storms to prevent damage.
·Operation of this unit within significant electromagnetic fields should be avoided.
Always turn OFF the power to the unit and all other equipment before connecting or disconnecting
any cables. Also make sure to disconnect all connection cables and the AC adapter before moving
the unit.
Cleaning
Clean only with a dry cloth.
Alterations
·Do not open the unit.
·Do not attempt to service the unit yourself.
·Opening the chassis for any reason will void the manufacturer’s warranty.
AC Adapter Operation
Always use a DC9V center negative 500mA AC adapter. Use of an adapter other than that specified
could damage the unit or cause malfunction and pose a safety hazard. Always connect the AC
adapter to an AC outlet that supplies the rated voltage required by the adapter.
UNPLUG THE UNIT DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
Malfunction
If the unit should malfunction, disconnect the AC adapter and turn the power OFF immediately.
Then, disconnect all other connected cables.
Prepare information including the model name, serial number, specific symptoms related to the
malfunction, your name, address and telephone number and contact the store where you bought
the unit, or contact VALETON support (info@valeton.net) .
Thank you for choosing a VALETON product!
ATTENTION
1
To Next Page
Loading...
Need help?
Audio Specifications
