Vallon VMH3CS - Visual Signals; Visual Signals during Detection

28
Metal Detector VMH3CS – Operation Manual
© 2007 Vallon GmbH, D-72800 Eningen/Germany
5. VISUAL SIGNALS
Provided that you have selected an alarm configuration with LED Display (please
refer to chapter 3.1), the LED-display in the hand grip indicates the following
conditions.
5.1 Visual Signals during Detection
Position of
Mode Selector
Meaning LED-Display
Increase sensitivity
Press button +
Press button +
maximum sensitivity
adjusted
Reduce sensitivity
Press button –
normal
mineral
Press button –
minimum sensitivity
adjusted
Legend:
LED flashes when pressing the button
LED is illuminated