INSTALLATION GUIDE – 203 DISPLAY
www.valortpms.com
2
Quick Use Notice
Please Read Before Installation
Default values have been assigned to each axle for the following:
‣ Standard Cold Inflation Pressure (SCIP) – found on tire sidewall
‣ Baseline Pressure – set by user according to SCIP
‣ Low Pressure Warning – -20% deviation from baseline pressure
‣ High Pressure Warning – +30% deviation from baseline pressure
‣ High Temperature Warning – set to 80℃ (176℉)
‣ Leakage Warning – air loss is greater than 4.8PSI in 16 seconds
Please read this Installation Guide carefully before using this product.
TPMS-203 is designed to monitor tire pressure and temperature. It is not designed to provide warning of
sudden critical tire damage and blowout caused by external effects. The driver should react promptly to any
warning and correct the problem.
Tires can fail for other reasons besides low pressure or overloading. Always be on the alert for any other tire
problems as indicated by unusual noises, vibrations, uneven tread wear, or bulges on the tire! If any of these
symptoms occur, have the tires checked immediately by a professional staff!
To Next Page
Loading...
Need help?
General
