CONTENTS
Section Heading
1. SAFETY 4
2. APPLIANCE DATA 5
3. GENERAL INSTALLATION REQUIREMENTS 6
4. PACK CONTENTS
5. FIREPLACE CHECK
5.1 Fireplace check
5.2 Fireplace Flue Pull
6. IGNITION CHECK
7. GAS SUPPLY CONNECTION
8. PREPARING APPLIANCE FOR INSTALLATION
8.1 Appliance Preparation
8.2 The Flue Restrictor
9. CONVECTION BOX INSTALLATION
9.1 Method 1- Front Fixing to Fireplace Surround
9.2 Method 2 - Cable Retention
9.3 Floor Sealing
10. BURNER & SUPPLY PIPE INSTALLATION
10.1 Burner & Supply Pipe Installation
10.2 Preliminary Burner Checks
10.2.1 Lighting the burner
10.2.2 Operating the burner.
10.3 Reference Pressure Check
11. FITTING THE FRONT SURROUND
12. CERAMIC COALS INSTALLATION
13. FIREFRONT CASTING8INSTALLATION
14. FULL OPERATING CHECKS
15. SPILLAGE & FLAME SUPERVISION CHECKS
15.1 Check for Spillage
15.2 Flame Supervision & Spillage Monitoring System
16. FINAL REVIEW
17. SERVICING & PARTS REPLACEMENT
17.1 Checking the aeration setting of the burner.
17.2 To Remove the Fire Front Surround
17.3 To Remove the Burner Unit
17.4 To Remove the Pilot Unit
17.5 To Remove the gas valve
17.6 To Replace the Burner
17.7 To Remove the Main Burner Injector
17.8 To Remove the Appliance from the Fireplace
18. SHORT LIST OF SPARES
Page 3
INSTALLER GUIDE