Need help?Do you have a question about the Vamparossa E Series and is the answer not in the manual?
Explains symbols like CAUTION, WARNING, N.B., and QUALIFIED TECHNICIAN for safe operation.
Defines key terms such as Equipment, Operator, Qualified technician, Exposed person, Danger zone, and PPE.
Lists and illustrates the components specific to the E-1 horizontal burner model.
Lists and illustrates the components specific to the E-2 horizontal burner model.
Lists and illustrates the components specific to the E-3 horizontal burner model.
Illustrates the electrical components and wiring of the burner unit and transformer.
Provides a detailed list of all components with reference numbers and their descriptions.
Covers warnings, prohibited uses, and identification data for the equipment.
Details technical specifications for E-1, E-2, and E-3 models, including gas types, pressures, and consumption.
Provides guidance on lighting, noise emissions, vibrations, and electromagnetic compatibility.
Explains that data plates must remain legible and visible for identification and maintenance.
Details requirements for qualified personnel and safe handling, transport, and storage practices.
Outlines requirements for qualified personnel, site preparation, and utility connections.
Specifies safety procedures and checks for connecting the equipment to the electrical mains.
Provides the electrical circuit diagram and requirements for the installation site and ventilation.
Details requirements for flue installation, including different types and sensor placement.
Covers gas connection standards, materials, volumetric method, and connection pressure verification.
Explains the process for converting gas types and replacing main burner nozzles.
Details how to adjust maximum and minimum outlet pressure for proper flame control.
Provides instructions for assembling and inspecting the thermostat bulb for future replacement.
Provides detailed physical dimensions for the E-1 horizontal burner model.
Provides detailed physical dimensions for the E-2 horizontal burner model.
Provides detailed physical dimensions for the E-3 horizontal burner model.
Shows the physical dimensions for the transformer and burner electrical units.
Illustrates different assembly configurations for horizontal burners based on oven diameter.
Illustrates assembly configurations for vertical burners.
Details the correct installation procedure for the temperature sensor within the oven.
Shows the correct procedure for assembling the flue gas sensor.
Details the correct positioning and clearance for flame ignition and detection electrodes.
Illustrates the correct connection of flame ignition and detection electrode cables.
Emphasizes correct vertical positioning of the gas valve and shows related connections.
Provides comprehensive wiring diagrams for the burner unit and gas valve board.
Indicates the location and rating of fuses within the control and transformer units.
Provides a template for documenting the initial start-up and testing of the burner.
A log to record periodic inspections and maintenance performed by installers or technicians.
General| Brand | Vamparossa |
|---|---|
| Model | E Series |
| Category | Burner |
| Language | English |
To Next Page