REV 1.1 CT-3500 S2 USER’S MANUAL
13
d. The following screen will be displayed:
Type the station name using the keypad and then press the [ENTER] key.
e. The following screen will be displayed:
Type the circuit information using the keypad and then press the [ENTER] key.
f. The following screen will be displayed:
Type the manufacturer name using the keypad and then press the [ENTER] key.
MANUFACTURER:
_
↑/↓ TO POSITION
"ENTER" TO ACCEPT
CIRCUIT:
_
↑/↓ TO POSITION
"ENTER" TO ACCEPT
STATION:
_
↑/↓ TO POSITION
"ENTER" TO ACCEPT
To Next Page
Loading...