Need help?Do you have a question about the Vanguard System VM-5500 and is the answer not in the manual?
General| Screen Size | 55 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Refresh Rate | 60 Hz |
| Viewing Angle | 178° (H) / 178° (V) |
| Inputs | HDMI |
| Speakers | 2 x 10W |
Overview of the VM-5500 monitor's capabilities, features, and hardware.
Technical specifications including power, temperature, size, weight, and harnesses.
Guidance on mounting the monitor using RAM mounts and connecting power supply.
Details on connecting power leads and optional visual alarm light.
Instructions for connecting the main harness to the implement and speed sources.
Setup and licensing procedures for the optional onboard GPS functionality.
Step-by-step guide on how to access and initiate the monitor's setup assistant.
Explanation of navigation controls and required parameters within the setup assistant.
Covers sensor selection, row/spacing/width settings, display/section assignments.
Procedures for safely finishing or exiting the setup assistant.
Advanced configuration for additional product sensors and implement settings.
Configuration guidance for RPM, VAC/Pressure, Lift Switch, and Hopper sensors.
Customization options for alarms, display brightness, and other interface settings.
How to navigate the Setup Screen in Normal mode for direct parameter adjustment.
Overview of the menu bar functions for system navigation and status monitoring.
Explanation of the Home screen's console and bar graph areas for data display.
Summary of seed and accessory sensor data, including population and counters.
Summary of flow sensor data, including rate, total flow, and acre counters.
Detailed row-by-row analysis of singulation, skips, and multiples.
Functionality for calculating and tracking covered acres during operation.
How to interpret GPS signal strength and lock indicators on the monitor display.
Plumbing diagrams and installation guidelines for precision flow meters.
Setup for using a Master Flow sensor instead of per-row sensors for the implement.
Recommendations for cleaning and winterizing the Visu-Flo flow meter system.
Detailed pin assignments for the 30-pin console connector.
Detailed pin assignments for the 18-pin console connector.
Pin configuration for the 4-pin power input and alarm output connector.
Pin assignments for the 4-pin speed input connector (Radar/Speed).
Comprehensive pin assignments for the 37-pin implement harness.
Part numbers for the VM-5500 monitor and related accessories.
Part numbers for various planter and drill harnesses and kits.
Part numbers for console power and accessory extension harnesses.
Part numbers for Visu-Flo meters, brackets, harnesses, and Y cables.
To Next Page