EasyManua.ls Logo

Vanner 20-1050CUL - Introduction

Vanner 20-1050CUL
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VA N NE R INCO R POR A T ED 20-1050CUL INVERTER/CHARGEROWNER'S MANUAL
1
Section 1: Introduction
Thank you for purchasing a Vanner 20-1050CUL Power Inverter/Battery Charger for your
emergency vehicle. We are confident you will be satisfied with its performance.
Vanner products are designed and manufactured by skilled professionals using the highest
standards in workmanship, guaranteeing excellent performance and reliability for your emergency
vehicle. With minimum maintenance and care, you can expect years of trouble-free service from
your Vanner product.
The 20-1050CUL is a 12 VDC to 120 VAC inverter with a built-in battery charger/conditioner and
transfer relay. This unit is equipped with an AC line cord for connecting AC input power
(shore/utility power) and a receptacle with a Ground Fault Circuit Interrupter (GFCI) for AC
output. This enables you to plug AC loads directly into the inverter. The DC cables have quick
connectors to facilitate installation and pre-wiring of emergency vehicles.

Related product manuals