25
6 CLEANING/HYGIENE
X Pull the Mouthpiece out of the
Cooling Unit Cap while slightly tilting
it back and forth.
X Pull off the Mouthpiece Seal Ring.
X When cleaning the Cooling Unit Cap
in isopropyl alcohol, remove the cap
lock by pulling it up on one side.
X Unscrew the Cooling Unit base from
the Vaporizer by turning it 90° coun-
terclockwise.
X Lever out the large Base Seal Ring
with Filling Chamber Tool at the re-
cess in the groove.
X Remove the small Base Seal Ring.
X Press the Screen with the Filling
Chamber Tool from the top to the
bottom out of the Cooling Unit base.
To Next Page
Loading...