Vapormed Mighty Plus MEDIC - Page 42

42 pages

Save Page as PDF

To Previous Page

Manufacturer and Distributor:

STORZ & BICKEL GmbH

In Grubenäcker 5-9 · 78532 Tuttlingen /Germany

Phone +49-7461- 969707-0 · Fax +49-7461-96 9707-7

e-mail: info@storz-bickel.com

Main Page

Table of Contents2
Mighty + Medic5
Scope of Delivery5
Functional Elements6
Cooling Unit7
Operating Life7
Service7
For Your Safety8
Explanation of Symbols MIGHTY + MEDIC8
Explanation of Symbols of the USB Charger9
Legend10
Basic Rules10
Safety Recommendations11
Risk of Injury Due to Electric Shock11
Danger of Injury Due to Burning/Vapors12
Risk of Injury Due to Various Causes12
Intended Use, Side Effects, Contraindications13
Intended Use13
Side Effects13
Contraindications13
Important Information about Cannabinoids14
Commissioning and Operation15
Storage and Transport Conditions15
Unpacking15
Operating Conditions15
Battery16
Basic Explanation of the Battery Charge Display16
Charging the Battery16
Explanation of the Battery Charge Display During Charging (Depending on the Charger Used)16
Charging with the USB Charger16
Quick Charge (if Supported by the Charger)16
Charging with a Low Power Charger17
End of the Charging Process17
Mains Operation (Only Possible with USB-C Supercharger)17
Herb Mill18
Dosing Capsule (for Single Use) and Magazine18
Filling the Dosing Capsule with the Aid of the Magazine Cap18
Filling the Magazine with Dosing Capsules19
Inserting the Dosing Capsule into the Filling Chamber19
Heating up20
Display20
Default Settings20
Switching on20
Base Temperature20
Booster Temperature20
Superbooster Temperature21
Celsius/Fahrenheit21
Reset to Default Settings22
Inhalation22
End of Inhalation22
Disposal of the Dosing Capsules23
Automatic Switching off23
Storage23
Cleaning/Hygiene24
Mouthpiece24
Cooling Unit24
Disassembling the Cooling Unit24
Cleaning the Cooling Unit and Filling Chamber Screen26
Cleaning the Cooling Unit and the Filling Chamber Screen with Rinsing Water26
Cleaning the Cooling Unit and the Filling Chamber Screen with Isopropyl Alcohol26
Check the Cooling Unit Parts and the Filling Chamber Screen27
Assembling the Cooling Unit27
Filling Chamber28
Cleaning the Filling Chamber28
Removing the Screen28
Installing the Screen28
Cleaning the Vaporizer, the USB Charger and the USB-C Cable28
Cleaning the Herb Mill and Magazin for Dosing Capsules29
Optional Accessories30
Faults31
Possible Faults / Troubleshooting31
Disposal31
Technical Specifications32
MIGHTY + MEDIC Vaporizer32
USB Charger32
Technical Requirements for Suitable Chargers32
Information on Electromagnetic Compatibility32
Compliance with Legal and Normative Requirements33
Warranty, Liability, Copyright34
Warranty34
Liability34
Copyright34

Vapormed Mighty Plus MEDIC - Page 42

Table of Contents