ProStar 430 Autosampler Control Manual - 29 - 03-914947-33:2
The following screen is displayed:
In the Acquisition Parameters tab, required fields like the
Run Name, the Run ID and the Acquisition length must be
filled in before starting an analysis. Furthermore, if the
system is equipped with an autosampler controlled by
Galaxie Chromatography Data System, the Injection
Volume, the Vial position and the Rack number (if required)
must be entered.
Other parameters associated with each acquisition channel
can be entered in the Channel X tab.
3. Click on the Start button to start the acquisition if the
system is a single-injector system or click on the Next
button if the system is a multiple injector system. In a
multiple injector system, the same parameters entered for
the first injector must be entered for the other injectors
before starting the acquisition.
To Next Page
Loading...
