ProStar 430 Autosampler Control Manual - 40 - 03-914947-33:2
ERROR 73 Current limit of the external I/O exceeded.
ERROR 75 Error occurred during initialization, the ProStar
430 cannot start.
¾ Plate holder:
ERROR 90 Plate home time-out, plate did not reach home
position (home error).
ERROR 91 Plate did not reach or leave home position during
run.
ERROR 92 Plate holder missing.
ERROR 93 Dirt on the plate holder.
¾ Plate feeder:
ERROR 80 Cannot rotate the grab head while needle is
down.
ERROR 81 Grab head did not reach home position in time.
ERROR 82 Grab head is not in home position when needle
moving down.
ERROR 83 Grab head clamping timing error.
ERROR 94 Error grab head position.
ERROR 95 Left lift no empty before run.
ERROR 96 Horizontal or vertical position of grab head not
reached in time.
ERROR 97 Lift home time out.
To Next Page
Loading...
