11
Vasa SwimErg User’s Manual
August 2022
B
A
PART 1 - Assembly
STEP 10: POWER METER - INSTALLING & ADJUSTING
NOTE: The Power Meter may automatically turn ON when the cables are connected. Before
beginning your workout, turn the monitor OFF and wait two seconds. Push the ON button to power
back on and begin your workout.
10.1. Install the plastic washer onto the threads of the mounting knob.
10.2. Thread the mounting knob through the metal bracket on the Power Meter (A) and the metal
bracket on the Erg cover (B).
10.3. Pivot the Power Meter to the desired angle (back/forward) and tighten the knob clockwise.
To Next Page
Loading...