22 © 2009 VBrick Systems, Inc.
Configuration: Decoder > RTP
Configuration: Decoder > RTSP
Program Stream
Selection
The decoder can be configured to request an audio-only, video-only or
closed caption stream.
Time in Jitter
Queue
The jitter queue is a buffer which will fill up in case of network
latency. This is helpful when connecting over networks which exhibit
non-linear data transmission such as the public internet. The jitter
queue is adjustable. The higher the value, the more jitter the decoder
can handle but at the cost of overall latency (delay). The range is from
0 to 5000 milliseconds. Default is 250ms. See Status: Decoder Status >
Network on page 69 for details about Jitter Queue Underflow and
Jitter Queue Overflow.
RTCP Receiver
Reports
When enabled, the decoder client will send RTCP receiver reports to
the server. This is sometimes used as a keep-alive for the server.
To Next Page
