System Status
VBrick MPEG-4 Appliance Admin Guide 73
Status: RTSP Server Status
Status: RTSP Server Status > General
MPEG-4 only.
Video Resolution Resolution of snapshots determined by the configuration of the
associated MPEG-4 encoder. One of the following:
SIF (352x240)
QSIF (160x120)
CIF (352x288)
QCIF (176x144)
384x288
320x240
256x192
192x144
128x96
64x48
Number of Images Number of images captured since capture was enabled.
Number of Images
Transferred
Number of images transferred since capture was enabled. If the
number of snapshot transfers is lower than the number of snapshots,
the create time plus the transfer time is likely greater than the
configured snapshot interval.
Average Time to
Create ...
Milliseconds. Average time to create each snapshot over the last 10
snapshots.
Average Time to
Transfer ...
Milliseconds. Average time to transfer the snapshots from the VBrick
to the server over the last 10 transfers.
Transfer Status • Success – compressed snapshot successfully transferred to the
server. Waiting to capture another image.
• Transfer in progress.
• Timeout – Transfer failure due to timeout. Indicates a network
error, server error, or error in configuring the snapshot FTP page.
• Rejected – Transfer failure due to invalid user name or password.
• Aborted – Not enough space on server.
• Disabled – Snapshot capture is disabled.
JPEG File Name Name of .jpg file being transferred to server.
Date/Time of
Capture
Date and time of last successful capture.
To Next Page
