MPEG-4 Configuration
VBrick MPEG-4 Appliance Admin Guide 35
MPEG4 Announce Common Information
Program Name The string providing the name of the stream associated with this
Session Announcement Protocol, or SAP. This SAP text shows up in
the Program Guide for other VBrick products. Default is \H Program
x, (1 or 2, for slot1 or slot2). Both Program Name and Session
Information allow special character strings to be inserted
automatically into these fields. This is true for encoding entries, Slot1
encoders, Slot2 encoders and, when installed, the Hard Drive Pump.
The symbol "\" followed by any other letter is dropped and replaced
by the letter.
• \H or \h – Host Name of Vbrick appliance. When the default
entry is used, the Vbrick is identified by the default Host Name,
and will be identified as such on the network, see the StreamPlayer
software example below.
Program Author A string in the SAP that can be used to identify the author. This
appears in the Windows Media player and others. Default is "My
Author."
Program Copyright A string in the SAP that can be used to identify the copyright
information. Default is "My Copyright."
To Next Page
