VDO Cyclecomputing M6.1 - Setting the NAVIGATOR; Resetting the NAVIGATOR to ZERO; Light mode ON;OFF

ENGLISH
5352
BIKETPC
SET
ALTI
BIKETPC
SET
ALTI
BIKETPC
SET
ALTI
Setting the NAVIGATOR
– Press the BIKE button to display
the NAVIGATOR function
– Press and hold the SET button
– Change data: press the BIKE
or TPC button
– Confirm the setting: press the
SET button
Light mode ON/OFF
Resetting the NAVIGATOR to ZERO
– Show the navigator function on the display
– RESET: press and hold the BIKE button
– ON: press the TPC + SET
buttons simultaneously
– OFF: press the TPC + SET
buttons simultaneously
ATTENTION: the light mode is automatically deactivated after
a break to reduce the battery consumption.