20
M1 WL
Resetting trip data after the trip
After each trip, you can reset the data for this trip to zero.
The VDO M1 WL is then ready for the next trip.
ATTENTION: your total distance (total number of kilometres
ridden) is not reset to zero.
The process is as follows:
Press and hold the BIKE button for a few seconds.
The text “RESET Tour Data” appears on the display.
If you continue to hold down the BIKE button,
the trip data is now reset to zero.
The following data is reset to zero:
– Distance
– Ride time
To Next Page
Loading...
