Functions
Section time
The VDO M3 WL has a trip section counter.
The trip section counter is like a stopwatch.
If the trip section counter is running,
the section time is recorded, as on a stopwatch.
When the trip section counter is running,
the section distance is also recorded.
The trip section counter is started and stopped by pressing
the BIKE + SET buttons (simultaneously press both buttons –
do NOT hold).
ATTENTION: the trip section counter stops automatically
when the speed is zero.
A detailed description of the trip section counter can be found
on page 33.
Section distance
Shows the distance travelled while the trip section counter is
activated.
To Next Page
Loading...
