VDO M5 User Manual (English)

Other manuals for VDO M5

Questions and Answers:

Q
qkellerAug 2, 2025
Why is no speed displayed on my VDO M5 Bicycle Accessories?
- K
  Kathy MartinezAug 2, 2025
  If your VDO Bicycle Accessories computer isn't displaying speed, several factors could be at play. First, ensure the distance from the sensor to the magnet isn't too great, and that the magnet is correctly aligned with the sensor. Next, verify the computer is properly clicked into the handlebar bracket. Also, check that the wheel circumference is correctly set and not set to zero. Finally, the transmitter battery might be dead, so try replacing it.
F
fbrooksAug 8, 2025
What to do if no heart rate is displayed on VDO M5?
- B
  Brian StephensAug 8, 2025
  If your VDO Bicycle Accessories computer isn't displaying your heart rate, there are a few things to check. First, make sure you've selected the heart rate sensor in the sensor selection area. Next, ensure the heart rate sensor has been paired by activating it and correctly positioning the heart rate chest belt on your body, then insert the computer into the handlebar bracket until the heart rate symbol flashes. Lastly, the battery in the heart rate chest belt might be dead, so try replacing it.
J
Jane RomanAug 13, 2025
Why is the display weak on my VDO M5?
- J
  Jacob GonzalezAug 13, 2025
  If the display on your VDO Bicycle Accessories is weak, it likely means the battery is running low. Check the battery and replace it if necessary.
C
Courtney GilbertAug 19, 2025
How to fix no cadence being displayed on VDO Bicycle Accessories?
- S
  Steven BowmanAug 19, 2025
  If your VDO Bicycle Accessories computer isn't displaying cadence, ensure the cadence sensor has been paired. Activate the cadence sensor and insert the computer into the handlebar bracket until the cadence symbol flashes to indicate pairing. Also, the battery in the cadence transmitter might be dead, so try replacing it.
G
ginaandersonAug 26, 2025
What to do if there are half segments on the VDO M5 Bicycle Accessories display?
- D
  dominique58Aug 26, 2025
  If you see half segments on the display of your VDO Bicycle Accessories, especially after a battery change, it could be due to the computer software not running correctly. Try removing and re-inserting the battery to resolve this.